90°stainless steel elbow supplier to share with you: the flange is referred to as flange, just a collective name, usually refers to a number of fixed on the periphery of a disk-like metal body Holes are used to connect other things. This thing is widely used in machinery, so it looks strange, as long as it looks like a flange, its name is derived from English flange. The part that connects the pipe to the pipe is connected to the pipe end. There are holes in the flange, and the bolts tightly connect the two flanges. The flanges are sealed with gaskets. Flange is a disc-shaped part, which is most common in pipeline engineering. Flange is used in pairs.
In pipeline engineering, flanges are mainly used for pipe connection. At the ends where two pipes need to be connected, a flange plate is installed at each end. Wire flanges can be used for low-pressure pipes, and welded flanges are used for pressures above 4 kg. Add a gasket between the two flanges and tighten with bolts.
Threaded flange with different pressure has different thickness and uses different bolts.
When pumps and valves are connected to pipelines, the parts of these equipment and equipment are also made into corresponding flange shapes, also known as flange connections.
Any connection parts that are bolted at the periphery of two planes and closed at the same time are generally called "flange", such as the connection of ventilation ducts, this type of parts can be called "flange parts".
Threaded flange is a type of flange. The threaded flange connection structure is an assembly consisting of a pair of flanges, bolts, nuts and a washer.
Sliding on the flange: The sliding flange has a lower hub because the pipe enters the single flange before welding. It is welded internally and externally to provide sufficient strength to prevent leakage. The sliding flanges are all boring for the larger diameter pipes. They are superior to neck flange welding. Due to the low initial cost, many users, but the final installation cost will probably not be comparable, because the added welding neck flange is less.
Lap flange: The lap flange is actually the exact same sliding flange unless it has a radius between the hole and the flange race. It is necessary to have a flange with a flange to accommodate the stub end. Often, lap stubs and lap stubs mate together to assemble the system.
Butt-welded flange: This butt-welded flange is similar to a sliding flange, but with threaded holes. Its main advantage is that it can be assembled without welding, creating a danger in the ordinary interpretation of atmospheric temperature in the use of low-pressure services and extremely explosive areas.
The socket butt welding flange is a similar sliding flange, except that it has a hole and counter hole size. The counter hole is slightly beer-to-orange than the O.D. pipe, so the pipe is inserted into the flange similar to a sliding flange. The smaller hole diameter is the same ID for the same pipe match. The limitation is the built-in hole, which stays at the bottom as a shoulder cover for the pipe. This eliminates any flow limitation when using socket welding flanges.